McConnells Paints
PH: 00 353 (0)1 2822 877
You are here:
| Product |
Tacomelt Low Melt 12mm hot melt sticks 5Kgs
TACOMELT LOW MELT in 12mm stick form is an off white coloured adhesive which melts at lower temperature & is ideal for many packaging paper and plastic applications where low temperature application is needed.
Sticks To:
Aluminium; Paper & Board; Expanded Polystyrene; G.R.P. ; Woods Colour
Off White Open Time
Short Heat Resistance
75 Centrigrade Suitable Applicators
TEC250; TEC810-12 |
Tec 250 12mm hot melt gun
The TEC 250 is a light, low output, easy to use, 12mm glue gun designed for smaller quantity requirements where less than one kilo of adhesive per hour is required.
Melt Rate
Up to .75kg/hr Adhesive Shape
12mm |
Tec 3200 43mm hot melt gun
The TEC 3200 is a high output electronic glue gun making it the ideal tool for product assembly, packaging sealing, electrical potting and encapsulation.
Melt Rate
up to 3.5kg/hr Adhesive Shape
43mm |
Tec 6100 43mm hot melt gun
The TEC 6100 pneumatic hot melt gun is a sturdy high output applicator specially developed for dispensing Tacomelt grades supplied in 43 mm cartridges.
Melt Rate
up to 4.1 kg/hr Adhesive Shape
43mm |
Tec 6300 43mm spraymelt gun
The TEC 6300 pneumatic Hot Melt Gun is an exceptionally high output hot melt spray applicator developed for spraying Tacomelt grades supplied in 43mm cartridges.
Melt Rate
up to 4.2 kg/hr Adhesive Shape
43mm |
Tec 810 12mm hot melt gun
The TEC 810-12mm is a medium output, heavy-duty, industrially-rated 12mm glue gun that is extremely easy to use.
Melt Rate
up to 2.0kg/hr Adhesive Shape
12mm |
Tec 810 15mm hot melt gun
The TEC 810-15mm is a medium output Hot Melt Gun specifically designed for the application of Tacomelt grades in 15mm diameter.
Melt Rate
up to 2.0kg/hr Adhesive Shape
12mm |
Temacoat GPLS Primer 3lts
TemacoatGPLS is a two pack primer providing excellent adhesion to Zinc, Steel & Aluminium surfaces, and as a sealer for hot dipped galvanised surfaces when thinned 20-30%
Recommended Use
Recommended for priming metals and as a first coat sealer onto hot dipped galvanised metal. Applications
As a sealer for hot dipped galvanised %for use on bridges, haulage equipment, cranes, steel masts, conveyors and other steelwork, machinery and equipment. Applic. Method
Brush;Spray Surface Dry
5hrs Hard Dry
2 Days |
Recommended Use
As a chemically resistant finish for transport and haulage equipment, storage tanks, steel framework and other steel structures, machinery and equipment. Applications
On steel beams, columns, ferrous metal stairways, tanks, machinery, doors, ironwork, etc. Also on concrete floors, walls & pavements in showrooms, airports, storerooms, factories, workshops , commercial & public buildings, warehouses, garages. Also airside walkways to terminals. Applic. Method
Brush;Roller Surface Dry
3hrs Hard Dry
24hrs |
Recommended Use
As a chemically resistant finish for transport and haulage equipment, storage tanks, steel framework and other steel structures, machinery and equipment. As a chemically resistant anti-slip floor topcoat for public pathways & floors at airports and other locations subject to significant mechanical and chemical stress conditions. Applications
On steel beams, columns, ferrous metal stairways, tanks, machinery, doors, ironwork, etc. Also on concrete floors, walls & pavements in showrooms, airports, storerooms, factories, workshops , commercial & public buildings, warehouses, garages. Also airside walkways to terminals. Applic. Method
Brush;Roller Surface Dry
3hrs Hard Dry
24hrs |
Recommended Use
For interior and exterior application as a penetrating sealer for absorbent concrete, brickwork and rendered surfaces to seal and protect from water penetration and to protect the surface from moderate mechanical and chemical stress. Applications
On concrete floors, walls & pavements in showrooms, storerooms, factories, workshops, commercial & public buildings, warehouses, garages. Applic. Method
Brush;Roller Surface Dry
3hrs Hard Dry
24hrs |
Recommended Use
For use as a floor coating in areas subject to heavy mechanical and chemical stress & requiring a high quality finish. Applications
In storerooms, showrooms, factories, plant rooms, schools, hospitals, workshops, garages Applic. Method
Brush;Roller Surface Dry
4hrs Hard Dry
24hrs |
Tikkurila Temaspeed Information
McConnells distributes this wide range of first class paints and coatings for the metal wood and for floors.
|
Water Based Adhesives Information
Water Based adhesives in liquid form for application by brush or spray.
|
