You are here:   Home  /  Products
* Product List * Colour Charts * Paint Calculator * My Basket quick_purchase

Browse

Order by:     Display #  

Results 141 - 160 of 187

Product

Rust-oleum Hard Hat Metallic Top Coat aerosols 500mls

Rust-oleum Hard Hat Metallic Top Coat aerosols 500mls
Excellent quality fast drying Top Coat aerosol in metallic colours for small areas or touch-up. 3 colours available. (Supplied in 500ml aerosols - 6 per box)

Buy Now
Recommended Use

Intended to be used on small areas or for touch-up on new bare steel or galvanised steel over metal primers such as Rust-oleum Galva Zinc primer & many Zinc phosphate primers.

Applications

By spray onto new bare primed and galvanised steel. Often used for machinery, pumps,toolboxed etc.. Coverage is approx. 2.5 sq mts at 25 microns dft. Recoatable: within 1 hour or after 48 @20 degree C.

Applic. Method

Spray

Surface Dry

15mins

Hard Dry

12hrs

Rust-oleum Hard Hat Top Coat aerosols 500mls

Rust-oleum Hard Hat Top Coat aerosols 500mls
Excellent quality fast drying Top Coat aerosol paints for small areas or touch-up. Approx 50 colours available. (Supplied in 500ml aerosols - 6 per box)

Buy Now
Recommended Use

Intended to be used on small areas or for touch-up on new bare steel, wood or galvanised steel. Can be used over metal primers such as Rust-oleum Galva Zinc primer & many Zinc phosphate primers.

Applications

By spray onto new bare and galvanised steel and wood - often where coatings have been damaged. Often used for colour coding. Coverage is approx. 2.5 sq mts at 25 microns dft.

Applic. Method

Spray

Surface Dry

15mins

Hard Dry

12hrs

Solvent Based Adhesives Information

Solvent Based Adhesives Information
Solvent Based adhesives in liquid form for application by brush or spray.

Buy Now

Structural Adhesives Information

Structural Adhesives Information
McConnells distributes Kommerling MS and polyurethane structural adhesives and sealants.

Buy Now

Tacobond 2448 .5lt red adhesive

Tacobond 2448 .5lt red adhesive
A special adhesive for bonding polystyrene & plastics. Available in clear and various can sizes.

Buy Now
Recommended Use

Tacobond 2448R is only produced for use as an adhesive in commercial and industrial applications. The product should be stored securely and as per the Safety Data Sheet.

Applications

Tacobond 2448R- for bonding specific substrates including polystyrene. The final bond strength may not be achieved until 48 hours after bonding. Drying times will depend on temperature and air movement.

Applic. Method

Brush;Dipping

Surface Dry

30mins

Hard Dry

12hrs

Tacobond 7000 5lts

Tacobond 7000 5lts
Tacogrip 7000 is a special polyurethane contact adhesive for bonding leather,PVC fabric and other substrates.

Buy Now
Recommended Use

Tacogrip 7000 is only produced for use as an adhesive in commercial and industrial applications. The product must be stored securely and used as per the Safety Data Sheet. Trials are essential.

Applications

Tacogrip 7000 - for bonding a wide variety of substrates such as leather, PVC, canvas, cloth, and certain foams. The final bond strength may not be achieved until 72 hours after bonding. Drying times will depend on substrates being bonded & comditions.

Applic. Method

Brush

Surface Dry

1hr

Hard Dry

48hrs

Tacogrip 59 CATTLE adhesive 5lts

Tacogrip 59 CATTLE adhesive 5lts
Tacogrip 59 CATTLE is a special contact adhesive for fixing auction number labels to Cattle, Sheep, Horses etc. at Mart Sales.

Buy Now
Recommended Use

59 CATTLE adhesive is only produced for use as an adhesive in commercial and industrial applications. The product should be stored securely and as per the Safety Data Sheet.

Applications

59 CATTLE adhesive- for bonding auction labels onto animal hides at Marts. Also used for labelling sheep.

Applic. Method

Brush(for small areas);Dipping

Surface Dry

10mins

Hard Dry

30mins

Tacogrip 8010 5lts

Tacogrip 8010 5lts
Tacogrip 8010 is a general purpose synthetic rubber contact adhesive with a relatively high softening point.

Buy Now
Recommended Use

Tacogrip 8010 is only produced for use as an adhesive in commercial and industrial applications. The product should be stored securely and as per the Safety Data Sheet.

Applications

Tacogrip 8010- for bonding a wide variety of substrates such as canvas cloth, wood, metal, painted surfaces and plastic films. The final bond strength may not be achieved until 48 hours after bonding. Drying times will depend on substrates being bonded.

Applic. Method

Brush;Roller;Spray

Surface Dry

12hrs

Hard Dry

7 Days

Tacogrip 8175 SBR Adhesive 25lts

Tacogrip 8175 SBR Adhesive 25lts
Tacogrip 8175 is a special purpose sprayable contact adhesive for bonding paper, canvas, wood, fibreglass, and polyether foams.

Buy Now
Recommended Use

Tacogrip 8175 is only produced for use as an adhesive in commercial and industrial applications. The product must be stored securely and used as per the Safety Data Sheet.

Applications

Tacogrip 8175- for bonding a wide variety of substrates such as canvas cloth, fibreclass, wood, metal, and polyether foams. The final bond strength may not be achieved until 48 hours after bonding. Drying times will depend on substrates being bonded.

Applic. Method

Brush;Spray

Surface Dry

10mins

Hard Dry

48hrs

Tacomelt 1034 12mm hot melt sticks 5Kgs

Tacomelt 1034 12mm hot melt sticks 5Kgs
TACOMELT 1034 is a clear, high performance, product assembly adhesive with medium open time.

Buy Now
Sticks To:

Paper & Board; Expanded Polystyrene; Woods; Rigid Polystyrene; Textiles

Colour

Clear

Open Time

Medium

Heat Resistance

75 Centigrade

Suitable Applicators

TEC250; TEC810-12

Tacomelt 1034 15mm hot melt sticks 5Kgs

Tacomelt 1034 15mm hot melt sticks 5Kgs
TACOMELT 1034 in 15 mm stick form is a clear, high performance, product assembly adhesive with medium open time.

Buy Now
Sticks To:

Paper & Board; Expanded Polystyrene; Woods; Rigid Polystyrene; Textiles

Colour

Clear

Open Time

Medium

Heat Resistance

75 Centigrade

Suitable Applicators

TEC810-15

Tacomelt 1034 43mm hot melt shot 10Kgs

Tacomelt 1034 43mm hot melt shot 10Kgs
TACOMELT 1034 in 43 mm shot form is a clear, high performance, product assembly adhesive with medium open time.

Buy Now
Sticks To:

Paper & Board; Expanded Polystyrene; Woods; Rigid Polystyrene; Textiles

Colour

Clear

Open Time

Medium

Heat Resistance

75 Centigrade

Suitable Applicators

TEC3200; TEC6100

Tacomelt 1052 12mm hot melt sticks 5Kgs

Tacomelt 1052 12mm hot melt sticks 5Kgs
TACOMELT 1052 is a medium open time, clear, general purpose adhesive with good adhesion to many surfaces.

Buy Now
Sticks To:

Paper & Board; Expanded Polystyrene; Glass; Rigid Polystyrene

Colour

Clear

Open Time

Medium

Heat Resistance

85 Centrigrade

Suitable Applicators

TEC250; TEC810-12

Tacomelt 1052 15mm hot melt sticks 5Kgs

Tacomelt 1052 15mm hot melt sticks 5Kgs
TACOMELT 1052 in 15 mm stick form is a medium open time, clear, general purpose adhesive with good adhesion to many surfaces.

Buy Now
Sticks To:

Paper & Board; Expanded Polystyrene; Glass; Rigid Polystyrene

Colour

Clear

Open Time

Medium

Heat Resistance

85 Centrigrade

Suitable Applicators

TEC810-15

Tacomelt 1052 43mm hot melt shot 10Kgs

Tacomelt 1052 43mm hot melt shot 10Kgs
TACOMELT 1052 in 43 mm polyshot form is a medium open time, clear, general purpose adhesive with good adhesion to many surfaces.

Buy Now
Sticks To:

Paper & Board; Expanded Polystyrene; Glass; Rigid Polystyrene

Colour

Clear

Open Time

Medium

Heat Resistance

85 Centrigrade

Suitable Applicators

TEC3200; TEC6100

Tacomelt 1130 12mm hot melt sticks 5Kgs

Tacomelt 1130 12mm hot melt sticks 5Kgs
TACOMELT 1130 in 12mm stick form is a high performance, pale amber coloured, general-purpose adhesive with a long open time. Once set, it forms a tough but flexible bond.

Buy Now
Sticks To:

ABS; Aluminium; Glass; G.R.P. ; Woods; Stainless Steel

Colour

Pale Amber

Open Time

Long

Heat Resistance

85Centigrade

Suitable Applicators

TEC250; TEC810-12

Tacomelt 1130 15mm hot melt sticks 5Kgs

Tacomelt 1130 15mm hot melt sticks 5Kgs
TACOMELT 1130 in 15mm stick form is a high performance, pale amber coloured, general-purpose adhesive with a long open time. Once set, it forms a tough but flexible bond.

Buy Now
Sticks To:

ABS; Aluminium; Glass; G.R.P. ; Woods; Stainless Steel

Colour

Pale Amber

Open Time

Long

Heat Resistance

85 Centigrade

Suitable Applicators

TEC810-15

Sticks To:

ABS; Aluminium; Glass; G.R.P. ; Woods; Stainless Steel

Colour

Pale Amber

Open Time

Long

Heat Resistance

85 Centrigrade

Suitable Applicators

TEC3200; TEC6100

Sticks To:

Aluminium; Polypropylene; Rigid Polystyrene; PVC; Textiles

Colour

Off White

Open Time

Very Long

Heat Resistance

80 Centigrade

Suitable Applicators

TEC3200; TEC6100

Sticks To:

Paper & Board; Expanded Polystyrene; Rigid Polystyrene

Colour

Pale Amber

Open Time

Short

Heat Resistance

85 Centrigrade

Suitable Applicators

TEC250; TEC810-12




Display #  
Results 141 - 160 of 187

MY BASKET



Your Cart is currently empty.

Show Cart

SIGN UP TODAY
SPECIAL OFFERS
Special Offers
facebook_32twitter_32iso