McConnells Paints
PH: 00 353 (0)1 2822 877
You are here:
| Product |
Fortaclad E34 20LTs
Synthetic Oxide type Gloss Paint for cladding and roofing on farm & industrial buildings and on 40 foot containers.
(20lts)
Recommended Use
To repaint cladding and aged corrugated iron panels on industrial &farm buildings and containers. On new ferrous metal use as a topcoat gloss over a primed and undercoated system. Not for application to new galvanised metal. Applications
Primarily for exterior application on metal cladded farm & industrial buildings. Also suitable for interior application on wooden doors, window frames, barge boards, eaves, structural steel beams, ferrous metal stairways, tanks, machinery, doors, ironwork, etc. Applic. Method
Brush;Spray Surface Dry
4hrs Hard Dry
2 Days |
Recommended Use
To finish woodwork with a topcoat gloss over Fortacoat E245 undercoat, and as a gloss finish over primed and undercoated ferrous metal. Applications
For exterior & interior application on wooden doors, window frames, barge boards, eaves, structural steel beams, ferrous metal stairways, tanks, machinery, doors, ironwork, etc. Applic. Method
Brush;Roller;Spray Surface Dry
4hrs Hard Dry
2 Days |
Fortacoat Q732 Grey 5LTs
Fortacoat Q732 Squirrel Grey is a brushable single pack grey floor paint ideal for foot traffic & medium duty use.
Recommended Use
As a brushable gloss finish on concrete floors subject to foot traffic, and on wood floors, doors and skirtings, and on ferrous metal stairways and furniture, etc... 4 Applications
On concrete floors in storerooms, showrooms, factories, workshops. Also on timber and metal as a hardwearing finish for exterior and interior application. Applic. Method
Brush;Spray Surface Dry
4hrs Hard Dry
2 Days |
Fortaguard E410 15KGs
Waterbased protective elastomeric exterior masonry protective coating
(Available in 6kgs & 15kgs)
Recommended Use
As a high build protective and decorative finish for new or prepainted concrete, rendered & brickwork walls - for up to 10 years life cycle. Applications
On external walls of houses, hotels, schools, offices, commercial buildings, public buildings, garages, etc.. Applic. Method
Brush;Roller Surface Dry
3hrs Hard Dry
24hrs |
Tec 250 12mm hot melt gun
The TEC 250 is a light, low output, easy to use, 12mm glue gun designed for smaller quantity requirements where less than one kilo of adhesive per hour is required.
Melt Rate
Up to .75kg/hr Adhesive Shape
12mm |
