McConnells Paints
PH: 00 353 (0)1 2822 877
You are here:
| Product | Recommended Use | Applications | Applic. Method |
Recommended Use
As a finish to metal in order to provide a protective finish in areas subject to heat up to 600 degrees c. Applications
for wood burning stoves, tanks, machinery, doors, ironwork, etc., subject to high temperature. Coverage is 9 to12 m2 per litre per coat depending on the application and the substrate. Applic. Method
Brush;Spray;Dipping Surface Dry
15mins Hard Dry
1hr |
Fortalac A249 HTR AEROSOL
Very High heat resistant (to 600c) fast drying matt finish in an Aerosol
(400mls)
Recommended Use
As a finish to metal in order to provide a protective finish in areas subject to heat up to 600 degrees c. Applications
For wood burning stoves, tanks, machinery, doors, ironwork, etc., subject to high temperature. Coverage is 9 to12 m2 per litre per coat depending on the application and the substrate. Applic. Method
Spray Surface Dry
15mins Hard Dry
1hr |
Rust-oleum Galva Zinc Spray 2185 500mls
Fast drying zinc pigmented cold galvanising compound for small areas or touch-up.
(Available in 500ml aerosols)
Recommended Use
Intended to be used on small areas or for touch-up on new bare steel or galvanised steel. Can be used as a primer or single coat in some areas. Applications
By spray onto new bare and galvanised steel - often where galvanised has been damaged or cut. Often used in fabrication shops. Applic. Method
Spray Surface Dry
30mins Hard Dry
7 Days |
