You are here:   Home  /  Products  /  Paints  /  Fire Protection  /  Fire Retardant  /  ZEROFLAME FIRE RETARDANT TREATMENT 5LTs
* Product List * Colour Charts * Paint Calculator * My Basket quick_purchase
Paints arrow Fire Protection arrow Fire Retardant arrow ZEROFLAME FIRE RETARDANT TREATMENT 5LTs

ZEROFLAME FIRE RETARDANT TREATMENT 5LTs

Penetrative Timber Protection
Zeroflame Fire Retardant Treatment is a clear solution that soaks beneath the surface to leave the appearance of the timber aesthetically unchanged. Applied by brush, roller or spray it achieves British Standard Class 0 (Euroclass B) Fire Protection and Spread of Flame on solid timber. Zeroflame Fire Retardant Treatment can be used inside or out and the fire protection remains effective for the lifetime of the wood surface.

Zeroflame Fire Retardant Treatment soaks into the woods surface, sealing the wood but without leaving a clear glaze on top like a varnish. It then dries with virtually no evidence of the wood ever been treated, allowing you to keep the woods natural beauty and allows you to overcoat the timber with most good quality wood stains and varnishes!  Apply 3 coats leaving 40-60mins between coats, each 5lt tin will cover a total of 18.5m² (i.e. if you have an area of 18.5m2 to protect, you will only need 1 x 5lt - there is enough in each 5lt to do the 3 coats)

Zeroflame can be applied with a brush, roller or spray gun.  Full certification is issued with every purchase.  It has been fully tested and approved to British Standards. 

Zeroflame works by insulating the timber from heat, retarding ignition and stopping the flame from spreading accross the surface.

Recommended Use

Zeroflame Fire Retardant Treatment is a fire retardant system for the fire protection of hardwoods, softwoods and other cellulose based substrates. Zeroflame Treatment treated timber must only be used above the Damp Proof Course level and/or above ground contact. Trials should be carried out on decorative timber species to check any shade changes prior to the full application of the Treatment.

Applications

Wood doors & pannelling internally and externally. It is not affected by moisture when dry, is non-toxic and non-allergic. This treatment is a simple product to use for the protection of timber against fire.

Applic. Method

Brush;Roller;Spray

Surface Dry

1hr

Hard Dry

24hrs

Download data sheet PDF's

To Buy This Product

This product is not currently available online.

Each item is suited individually to the application. To purchase this item or make an enquiry please call us on 01 2822877 or contact us online here €241.5

 

Related Products

9" Roller Handle, Tray & 3 Rollers
9
€10.11

4" Paint Brush
4
€7.99